5 simple steps...
In the First Step you should remove the System
REMOVING LOTION
STEP ONE
MACO Cleansing Lotion is suitable for removing the Hair System during Maintenance and cleaning the front line.
Also, the product helps to remove any traces of oiliness from the skin before applying the System, so that both the double-sided tapes and the liquid adhesive stick better.
How is it used?
Spray along the front line, wait 1 minute and then begin to pull the system back while continuing to spray until the entire System comes off.
Use before new application Spray MACO Cleansing Lotion onto a lint-free cloth and then thoroughly cleanse the scalp before applying the Hair System.
*This product is the 1st step of the MACO Hair Systems maintenance process. That's why the number 1 is written on it. To make sure that you complete the maintenance process of MACO Hair systems with complete success, make sure that you get all the products with the corresponding step numbers.
In the second step you should clean the Scalp and the System
CLEANSING LOTION
STEP TWO
Bonding Solvent is a glue remover , for cleaning MACO Hair Systems during Maintenance. Suitable for cleaning the System as well as the scalp. It is quite skin friendly and works very fast.
How is it used?
After you have removed the System, spray all over the head and gently massage the scalp to spread the product to all the places where glue remains. Wipe with a towel to remove glue and grease residues from the product. Rinse with plenty of water. Put a good amount of the Activ Bonding Shampoo in the palm and spread well over the entire surface of the scalp. Massage to remove the last remaining glue. Rinse with plenty of water. Repeat if necessary.
In the 3rd step you should clean the Scalp and the System
CLEANSING SHAMPOO
STEP THREE
MACO BONDING SHAMPOO is designed to clean both the scalp and the Hair System during the Maintenance process. This product is greasy enough to not wear down the System during cleaning.
How is it used?
After removing the glue apply all over your head and hair and wash normally.
*This product is the 3rd step of MACO's Hair Systems Maintenance process. That is why the number 3 is written on it. To carry out the Maintenance process with complete success, make sure that you have obtained all the products with the corresponding step numbers.
In the fourth step you should exfoliate the scalp
EXFOLIATION SCRUB
STEP THREE
MACO SCALP SCRUB is ideal for exfoliating and removing adhesive residues from the scalp during the maintenance process. It easily removes glue and fights dry skin, providing deep cleansing.
How is it used?
After washing with MACO Bonding Shampoo, apply all over the scalp and massage in gentle circular movements. Rinse with plenty of water.
*This product is the 4th step of the MACO Hair Systems maintenance process. That's why the number 4 is written on it. To make sure that you complete the maintenance process of MACO Hair systems with complete success, make sure that you get all the products with the corresponding step numbers.
In the fifth you should properly hydrate the System
KERATIN MASK
STEP FIVE
Thanks to its special composition, MACO HAIR KERATIN rebuilds the damaged hair of the Hair System. This special liquid keratin provides deep nourishment and shine to the hair, while at the same time softening the hair so that it does not break. Also, this product protects against high summer temperatures or low winter temperatures.
How is it used?
After you have finished installing your System spray the whole System and let it dry naturally.
Use it daily.
*This particular product is the 5th step of the MACO Hair Systems maintenance process. That's why the number 6 is written on it. To make sure that you complete the maintenance process of MACO Hair systems with complete success, make sure that you get all the products with the corresponding step numbers.
In the First Step you should remove the System
In the First Step you should remove the System
REMOVING LOTION
STEP ONE
MACO Cleansing Lotion is suitable for removing the Hair System during Maintenance and cleaning the front line.
Also, the product helps to remove any traces of oiliness from the skin before applying the System, so that both the double-sided tapes and the liquid adhesive stick better.
How is it used?
Spray the front line of the system and wait 2-3 minutes. Lift the front of the system and continue to spray the adhesive cleaner until the entire system is removed from the head. Gently massage the scalp to spread the product on all the places where glue remains. Wipe with a towel to remove glue and grease residues from the product. Rinse with plenty of water. Put a good amount of the Activ Bonding Shampoo in the palm and spread well over the entire surface of the scalp. Massage to remove the last remaining glue. Rinse with plenty of water. Repeat if necessary.
REMOVING LOTION
STEP ONE
MACO Cleansing Lotion is suitable for removing the Hair System during Maintenance and cleaning the front line.
Also, the product helps to remove any traces of oiliness from the skin before applying the System, so that both the double-sided tapes and the liquid adhesive stick better.
How is it used?
Spray the front line of the system and wait 2-3 minutes. Lift the front of the system and continue to spray the adhesive cleaner until the entire system is removed from the head. Gently massage the scalp to spread the product on all the places where glue remains. Wipe with a towel to remove glue and grease residues from the product. Rinse with plenty of water. Put a good amount of the Activ Bonding Shampoo in the palm and spread well over the entire surface of the scalp. Massage to remove the last remaining glue. Rinse with plenty of water. Repeat if necessary.
In the second step you should clean the Scalp and the System
In the second step you should clean the Scalp and the System
CLEANSING LOTION
STEP TWO
Bonding Solvent is a glue remover , for cleaning MACO Hair Systems during Maintenance. Suitable for cleaning the System as well as the scalp. It is quite skin friendly and works very fast.
How is it used?
Spray the front line of the system and wait 2-3 minutes. Lift the front of the system and continue to spray the adhesive cleaner until the entire system is removed from the head. Gently massage the scalp to spread the product on all the places where glue remains. Wipe with a towel to remove glue and grease residues from the product. Rinse with plenty of water. Put a good amount of the Activ Bonding Shampoo in the palm and spread well over the entire surface of the scalp. Massage to remove the last remaining glue. Rinse with plenty of water. Repeat if necessary.
CLEANSING LOTION
STEP TWO
Bonding Solvent is a glue remover , for cleaning MACO Hair Systems during Maintenance. Suitable for cleaning the System as well as the scalp. It is quite skin friendly and works very fast.
How is it used?
Spray the front line of the system and wait 2-3 minutes. Lift the front of the system and continue to spray the adhesive cleaner until the entire system is removed from the head. Gently massage the scalp to spread the product on all the places where glue remains. Wipe with a towel to remove glue and grease residues from the product. Rinse with plenty of water. Put a good amount of the Activ Bonding Shampoo in the palm and spread well over the entire surface of the scalp. Massage to remove the last remaining glue. Rinse with plenty of water. Repeat if necessary.
In the 3rd step you should clean the Scalp and the System
In the 3rd step you should clean the Scalp and the System
CLEANSING SHAMPOO
STEP TWO
MACO BONDING SHAMPOO is designed to clean both the scalp and the Hair System during the Maintenance process. This product is greasy enough to not wear down the System during cleaning.
How is it used?
Spray the front line of the system and wait 2-3 minutes. Lift the front of the system and continue to spray the adhesive cleaner until the entire system is removed from the head. Gently massage the scalp to spread the product on all the places where glue remains. Wipe with a towel to remove glue and grease residues from the product. Rinse with plenty of water. Put a good amount of the Activ Bonding Shampoo in the palm and spread well over the entire surface of the scalp. Massage to remove the last remaining glue. Rinse with plenty of water. Repeat if necessary.
CLEANSING LOTION
STEP THREE
MACO BONDING SHAMPOO is designed to clean both the scalp and the Hair System during the Maintenance process. This product is greasy enough to not wear down the System during cleaning.
How is it used?
Spray the front line of the system and wait 2-3 minutes. Lift the front of the system and continue to spray the adhesive cleaner until the entire system is removed from the head. Gently massage the scalp to spread the product on all the places where glue remains. Wipe with a towel to remove glue and grease residues from the product. Rinse with plenty of water. Put a good amount of the Activ Bonding Shampoo in the palm and spread well over the entire surface of the scalp. Massage to remove the last remaining glue. Rinse with plenty of water. Repeat if necessary.
In the fourth step you should exfoliate the scalp
EXFOLIATION SCRUB
STEP FOUR
MACO SCALP SCRUB is ideal for exfoliating and removing adhesive residues from the scalp during the maintenance process. It easily removes glue and fights dry skin, providing deep cleansing.
How is it used?
Spray the front line of the system and wait 2-3 minutes. Lift the front of the system and continue to spray the adhesive cleaner until the entire system is removed from the head. Gently massage the scalp to spread the product on all the places where glue remains. Wipe with a towel to remove glue and grease residues from the product. Rinse with plenty of water. Put a good amount of the Activ Bonding Shampoo in the palm and spread well over the entire surface of the scalp. Massage to remove the last remaining glue. Rinse with plenty of water. Repeat if necessary.
KERATIN MASK
Thanks to its special composition, MACO HAIR KERATIN rebuilds the damaged hair of the Hair System. This special liquid keratin provides deep nourishment and shine to the hair, while at the same time softening the hair so that it does not break. Also, this product protects against high summer temperatures or low winter temperatures.
STEP FIVE
How is it used?
Spray the front line of the system and wait 2-3 minutes. Lift the front of the system and continue to spray the adhesive cleaner until the entire system is removed from the head. Gently massage the scalp to spread the product on all the places where glue remains. Wipe with a towel to remove glue and grease residues from the product. Rinse with plenty of water. Put a good amount of the Activ Bonding Shampoo in the palm and spread well over the entire surface of the scalp. Massage to remove the last remaining glue. Rinse with plenty of water. Repeat if necessary.